EV/HEV驅動電動機的解析器傳感器接線線束

Customize the resolver sensor harness according for EV/HEV drive motor to your drawing or sample requirements.
金屬絲: AF200-T;
連接器: 終端;
應用: automotive resolver;
姓名: Resolver sensor wiring harness;
加工技術: 鉚, peeling and tin dipping, 集會;
Customized according to customer needs: wire harness length, 規格, 顏色, ETC。;
線束外部: fluororubber heat shrinkable sleeve;
耐壓: 直流300V, 10 毫秒;
導通電阻: ≤3歐姆;
絕緣電阻: ≥5兆歐;
插拔循環: ≥5000次;
Terminal pulling force>40(氮);
產品性能: 製造商選用優質材料，產品彈性高. 它耐酸、耐鹼, 耐油, 防潮, 防黴, 不易燃的, 耐磨, 耐腐蝕, 抗氧化劑, 防水的, 防塵的, 和抗紫外線.

解析器傳感器線束

產品認證: 工控機620, IP67級, 抵達, ROHS2.0, 醫學科學與技術研究所.
公司榮譽及資質: 國家高新技術企業, Gazelle Enterprise, UL, IPC 620, ISO9001, ISO 14000, ISO13485, IATF 16949, ETC.

EV/HEV驅動電動機的解析器傳感器接線線束

1 – Introduction to wiring harness wiring methods
When connecting the resolver sensor wiring harness, you need to pay attention to the wiring methods of the following four lines:
1. Red wire: Connect to the positive pole of the power supply.
2. Black wire: Connect to the negative pole of the power supply.
3. White wire: output analog signal.
4. Green wire: Ground wire.
When wiring, be sure to ensure that the polarity of the power supply is correct, otherwise the equipment may be damaged. 同時, the wiring must be firm and reliable to avoid loosening or poor contact during use.
After the wiring is completed, a Unicom test must be performed to ensure that the line is correct.

2 – Wiring Precautions
You need to pay attention to the following aspects when wiring:
1. Confirm the model and specification of the wiring harness to avoid mismatch.
2. Check the wiring harness before wiring to ensure there is no damage or wear to avoid malfunction during use.
3. Confirm the wiring position and installation direction to avoid incorrect wiring.
4. Make sure the working environment is dry, dust-free, water-free, and free of any power connections.

Three – Wiring Diagram Example
Below is a resolver sensor wiring harness wiring diagram. 希望這有助於每個人更清楚地理解接線方法.
在示意圖中, 紅色箭頭代表電源的正極, 黑色箭頭代表電源的負極, 白色箭頭代表傳感器模擬信號輸出, 綠色箭頭代表地線.

【Conclusion】
The above is an introduction to the wiring method of the resolver sensor harness. I hope it will be helpful to everyone. When using resolver sensors, you must pay attention to safety and ensure that the wiring is correct and reliable to ensure the normal operation of the equipment.