China Custom Waterproof Cable Security Outdoor Extension Cords

Custom Outdoor power cords (5ft / 10ft /20ft /30ft~200ft) with different safety certifications, Get premium quality extension power cords, extension leads, outdoor extension cord, extension wire, power extension cable and a variety of other power form China YAXUN.
Dây điện là dây dẫn điện. Thông thường cách truyền dòng điện là truyền điểm-điểm. Dây nguồn có thể được chia thành dây nguồn AC và dây nguồn DC theo cách sử dụng của chúng. Nói chung là, Dây nguồn AC là dây dẫn có dòng điện xoay chiều cao áp chạy qua. Do điện áp cao, loại dây này chỉ có thể được sản xuất chính thức sau khi có chứng nhận an toàn theo tiêu chuẩn thống nhất. The DC line basically passes direct current with a lower voltage, so the safety requirements are not as strict as the AC line, but for safety reasons, each country still has a unified safety certification.

14-50P RV/Range / Plug to (4) NEMA 5-15 / 20R 20 Amp, 1.5FT, Dryer Male Plug Household Adapter Power Cord,RV Distribution Adapter Cord

1.5FT, Dryer Male Plug Household Adapter Power Cord,RV Distribution Adapter Cord

5m 16.4ft IP65 Par Light Outdoor Power Cord for Powercon Connector

Waterproof Power Cable, 3 Pin Cáp nối dài chống nước

About this item
Suitable for outdoor waterproof stage light, for power connection between light and light, extending the power cable distance between light and light 5/10/20/50/100 mét (16.4 feet) in length, Male and female waterproof design plugs at both ends, used directly after purchase, If you want to be longer, you can buy more cable use in series.
Your stage lighting must be equipped with the same type of waterproof design connector plug, otherwise you can not use it Inside are three copper core wires, each with multiple copper wires, the wire is soft, foldable, will not break, Wrapped with insulating plastic on the outside, no short circuit, never hurt people, and the service life can be as long as 10 years.
Stage light interval extension power line, mainly used for outdoor waterproof led par lights or waterproof wall washers which with hand-to-hand waterproof connection cable.

The structure of the outdoor power cord
The structure of the power cord is not very complicated, but don’t simply see through it from the surface. If you study the power cord well, in some places, you still need a professional to understand the structure of the power cord.
The structure of the power cord mainly includes an outer sheath, an inner sheath, and a conductor. Common transmission conductors include metal wires made of copper and aluminum.

Outer sheath for outdoor power cord
The outer sheath, also known as the protective sheath, is the outermost sheath of the power cord. This outer sheath protects the power cord. The outer sheath has strong characteristics, such as high temperature resistance, low temperature resistance, natural light interference resistance, good winding performance, long service life, and environmentally friendly materials.

Inner sheath for outdoor power cord
The inner sheath, also known as the insulating sheath, is an indispensable middle structural part of the power cord. The main function of the insulating sheath, as the name implies, is to insulate, to ensure the safety of the power line, so that there will be no leakage between the copper wire and the air. And the material of the insulating sheath should be soft to ensure that it can be well embedded in the middle layer.

copper wire for outdoor power cord
The copper wire is the core part of the power cord, and the copper wire is mainly the carrier of current and voltage. The density of copper wire directly affects the quality of the power cord. The material of the power cord is also an important factor in the quality control, and the quantity and flexibility of the copper wire are also one of the factors considered.

Inner sheath for outdoor power cord
The inner sheath is a layer of material that wraps the cable between the shielding layer and the core, usually polyvinyl chloride plastic or polyethylene plastic. There are also low-smoke and halogen-free materials. Use according to the process regulations, so that the insulation layer will not be in contact with water, air or other objects, and the insulation will be protected from moisture and mechanical damage.