English
العربية
Български
中文(漢字)
Čeština
Dansk
Eesti keel
Suomi
Français
Deutsch
Ελληνικά
עברית
Magyar
Bahasa Indonesia
Italiano
日本語
한국어
Latīna
Latviešu valoda
Lëtzebuergesch
Polski
Português
Română
Русский
Slovenščina
Español
Svenska
ภาษาไทย
Tiếng Việt
Fabricação de moldes de injeção
These technologies include: micro-injection molding, high-fill composite injection molding, water-assisted injection molding. Mixed use of various special injection molding processes, foam injection molding, mold technology, simulation technology, etc..
Conectores automotivos e cabos de conexão para uso elétrico
Existem quase cem tipos de conectores usados em carros em geral, e existem centenas de conectores usados em um único modelo. Como as pessoas têm requisitos cada vez mais elevados para automóveis em termos de segurança, Proteção Ambiental, conforto, e inteligência, a aplicação de produtos eletrônicos automotivos está aumentando. Isso levará a um aumento no número de aplicações de conectores automotivos.
Common Items Using Plastic Injection Products Best Price
What are injection molded products? The molding process and technical requirements of injection molded products.
Injection molding products refer to the process of heating, plasticizing and melting the plastic with an injection molding machine, and then injecting it into the cavity of the molding mold; after cooling, the melt is solidified and then demoulded.
Injection molding is a method of producing shapes for industrial products. Products usually use rubber injection molding and plastic injection molding. Injection molding can also be divided into injection molding molding method and die casting method.
Adaptador de conectores de soquetes de energia DC Preço mais recente
O que é uma tomada DC? Processamento personalizado de conectores de soquete CC e cabos CC.
A tomada DC é uma tomada que corresponde à fonte de alimentação especial do monitor do computador. É composto por um soquete horizontal, um soquete vertical, uma base isolante, um estilhaço de contato em forma de garfo, e uma chaveta direcional. Os dois estilhaços de contato em forma de garfo estão posicionados no centro da base, dispostos verticalmente e horizontalmente e não conectados entre si.
Diferentes tipos de cabos de dados USB para venda
O que é um cabo de dados USB? O processo de personalização de cabos de dados USB.
O cabo de dados USB é usado para conexão e comunicação entre o computador e o dispositivo externo; também pode ser usado para carregar o telemóvel e a ligação ao exterior. Em termos leigos, o chicote elétrico usado para transmitir dados e carregar.
HDMI 1.4 4K Extension Cable Adapter Male To Female for Audio System
In a small space environment, the HDMI extension cable can be said to be a cost-effective extension method. The traditional HDMI copper cable mainly determines the transmission distance based on the quality of the wire core. Low-quality cables may have problems such as noise. High-quality cables can generally guarantee a high-definition signal transmission distance of 15-20 meters, and the price is relatively affordable and is very popular.
Online catalog of Custom Plastic Parts
What are plastic parts? The manufacturing process of precision plastic parts.
The choice of plastic part is mainly determined by the type of plastic (thermoplastic or thermoset), the starting form, and the shape and size of the part. The production of injection molded parts generally adopts compression molding, transfer molding, and injection molding. Lamination, molding and thermoforming are the shaping of plastics over molds.
The injection molding process can be roughly divided into the following six stages: Mold closing, glue injection, pressure holding, cooling, mold opening, and product removal. The above process is carried out repeatedly, and the products can be produced periodically in batches. The molding of thermoset plastics and rubber also involves the same process. No entanto, the temperature of the barrel is hotter, the temperature of the plastic is lower, and the injection pressure is higher. The mold is heated, and the material needs to be cured or vulcanized in the mold after injection, and then released while it is hot. The trend of today's processing technology is developing in the direction of high technology.