제품 카테고리
- 온도 센서 프로브 8
- 맞춤형 배선 하니스 39
- 사출 금형 제조 8
- 전자 스위치 공급업체 15
- 커넥터 및 케이블 22
- 전원 플러그 제조업체 11
- 의료 진단 케이블 13
제품 태그
USB-A to USB-B 2.0 케이블 480 Mbps for Printer or External Hard Drive 10 Foot
Custom USB-A to USB-B 2.0 Cable with 480 Mbps Transfer Speed for Printer or External Hard Drive, Gold-Plated Connectors, 10 Foot, Black
Category: 맞춤형 배선 하니스
태그: USB 데이터 케이블, 와이어 하니스
First of all, we need to understand the types of USB interfaces. USB interfaces can be roughly divided into different types such as USB-A, USB-B, Mini USB, Micro USB and USB-C. 그 중, USB-A is the most common type, mainly used to connect peripherals such as USB flash drives, printers, keyboards, 등. The USB-B interface is mainly used to connect devices such as printers and scanners.
There are also different wiring methods for different USB interfaces. Below, we will introduce the wiring methods of each type one by one.
USB-A interface wiring method
When wiring the USB-A interface, you need to pay attention to the following points:
Insert both ends of the USB connector into the USB interface of the device and the computer respectively.
Usually, the USB interface on the computer provides power, so if you want to charge the device, you need to connect the device to the USB interface of the computer.
If you need to read the data stored in the device from the computer, you need to connect the device to the USB interface of the computer.
In some cases, two USB-A interfaces can be connected through a USB-A to USB-A data cable. 하지만, this situation is very rare and it is generally not recommended to use it in this way to avoid damage such as overpowering.
USB-B interface wiring method
Like the USB-A connector, the USB-B connector also has two ends, which need to be inserted into the USB ports of the device and the computer respectively.
하지만, it should be noted that most devices such as printers and scanners are equipped with printer cables, which are data cables that convert from USB-B connectors to USB-A connectors. 그러므로, when using such devices, we only need to connect them to the USB-A port of the computer.
Custom USB-A to USB-B 2.0 Cable with 480 Mbps Transfer Speed for Printer or External Hard Drive, Gold-Plated Connectors, 10 Foot, Black
About this item
Custom 10-foot high-speed multi-shielded USB 2.0 A-Male to B-Male cable;
DEVICE COMPATIBLE: Connects mice, keyboards, and speed-critical devices, such as external hard drives, printers, and cameras to a computer;
ULTRA FAST SPEED: Full 2.0 USB capability with 480 Mbps transfer speed;
DURABLE DESIGN: Corrosion-resistant, gold-plated connectors for optimal signal clarity and shielding to protect against noise, minimizing interference for a clear signal.
Contact Us
Waiting for your email, we will reply you within 12 hours with valuable information you needed.
RELATED PRODUCTS
Resolver Sensor Wiring Harness for EV/HEV drive motor
Below is a resolver sensor wiring harness wiring diagram for EV/HEV drive motor. Hope this helps everyone understand the wiring method more clearly.
In the schematic diagram, the red arrow represents the positive pole of the power supply, the black arrow represents the negative pole of the power supply, the white arrow represents the sensor analog signal output, and the green arrow represents the ground wire.